New Insight on Carbon Dioxide-Mediated Hydrogen Production**

A new approach to hydrogen production from water is described. This simple method is based on carbon dioxide-mediated water decomposition under UV radiation. The water contained dissolved sodium hydroxide, and the solution was saturated with gaseous carbon dioxide. During saturation, the pH decreased from about 11.5 to 7–8. The formed bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing the recombination of hydroxyl and hydrogen radicals and prioritizing hydrogen gas formation. In the presented method, not yet reported in the literature, hydrogen production is combined with carbon dioxide. For the best system with alkaline water (0.2 m NaOH) saturated with CO₂ under UV-C, the hydrogen production amounted to 0.6 μmol h⁻¹ during 24 h of radiation.     

Effect of Elicitation with Iron Chelate and Sodium Metasilicate on Phenolic Compounds in Legume Sprouts

Seven-day-old sprouts of fenugreek (Trigonella foenum-graecum L.), lentil (Lens culinaris L.), and alfalfa (Medicago sativa L.) were studied. The legume seeds and then sprouts were soaked each day for 30 min during 6 days with water (control) or mixture of Fe-EDTA and sodium silicate (Optysil), or sodium silicate (Na-Sil) alone. Germination and sprout growing was carried out at temperature 20 ± 2 °C in 16/8 h (day/night) conditions. Phenolic compounds (free, ester, and glycosides) content were determined by HPLC-ESI-MS/MS using a multiple reaction monitoring of selected ions. Flavonoids and phenolic acids were released from their esters after acid hydrolysis and from glycosides by alkaline hydrolysis. The presence and high content of (−)-epicatechin (EC) in fenugreek sprouts was demonstrated for the first time. Applied elicitors decreased the level of free EC in fenugreek and alfalfa sprouts but enhanced the content of its esters. Besides, elicitors decreased the content of quercetin glycosides in lentil and fenugreek sprouts but increased the content of quercetin and apigenin glycosides in alfalfa sprouts. The applied elicitors decreased the glycoside levels of most phenolic acids in lentil and p-hydroxybenzoic acid in fenugreek, while they increased the content of this acid in alfalfa. The mixture of iron chelate and sodium silicate had less effect on changes in flavonoid and phenolic acid content in legume sprouts than silicate alone. In general, the used elicitors increased the content of total phenolic compounds in fenugreek and alfalfa sprouts and decreased the content in lentil sprouts. Among the evaluated elicitors, Optysil seems to be worth recommending due to the presence of iron chelate, which can be used to enrich sprouts with this element.     

Effect of Polythiophene Content on Thermomechanical Properties of Electroconductive Composites

The thermal, mechanical and electrical properties of polymeric composites combined using polythiophene (PT) dopped by FeCl₃ and polyamide 6 (PA), in the aspect of conductive constructive elements for organic solar cells, depend on the molecular structure and morphology of materials as well as the method of preparing the species. This study was focused on disclosing the impact of the polythiophene content on properties of electrospun fibers. The elements for investigation were prepared using electrospinning applying two substrates. The study revealed the impact of the substrate on the conductive properties of composites. In this study composites exhibited good thermal stability, with T₅ values in the range of 230–268 °C that increased with increasing PT content. The prepared composites exhibited comparable PA T_g values, which indicates their suitability for processing. Instrumental analysis of polymers and composites was carried out using Fourier Transform Infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM).     

The Ising version of the t–J model

The t–J model is analysed in the limit of strong anisotropy, where the transverse components of electron spin are neglected. We propose a slave-particle-type approach that is valid, in contradiction to many of the standard approaches, in the low-doping regime and becomes exact for a half-filled system. We describe an effective method that allows to numerically study the system with the no-double-occupancy constraint rigorously taken into account at each lattice site. Then, we use this approach to demonstrate the destruction of the antiferromagnetic order by increasing the doping and formation of Nagaoka polarons in the strong interaction regime.     

Fourier analysis of scratches generated on m‐GaN substrates during polishing

Generation of scratches on surface of m‐plane GaN substrates due to polishing was studied by atomic force microscopy (AFM). For epi‐ready substrates AFM images confirm a flat surface with the atomic step roughness while a lot of scratches are visible in AFM images for partially polished GaN substrates. The Fourier analysis of AFM images show that scratches propagate easier along {c‐plane} and {a‐plane} directions on m‐plane GaN surface. This observation is an evidence of anisotropy of mechanical properties of GaN crystals in the micro‐scale. This anisotropy is directly correlated with the symmetry and atomic arrangement of m‐plane GaN.     

Analytical protocol for investigation of zinc speciation in plant tissue

A specific procedure is proposed for investigating the chemical speciation of zinc (Zn) in plant tissues, viz., the extraction of Zn compounds from Plantago lanceolata L. followed by the chromatographic separation and inductively coupled plasma mass spectrometry (ICP-MS) identification of these compounds. In order to separate the Zn compounds, both size-exclusion (SEC) and ionexchange liquid chromatography (IC) were used in direct sequential and reverse sequential modes. In the direct sequential mode, the entire extract undergoes SEC separation and then the individual fractions are injected onto the ion-exchange column. The molecular size distribution is evaluated by SEC coupled on-line to the UV detector. In the reverse sequential mode, the entire extract undergoes the ion-exchange chromatographic separation and then the individual fractions are injected onto the size-exclusion column. The identification of Zn incorporated into the compounds is further performed using ICP-MS. This procedure is particularly useful in speciation studies when identification of the individual components of the element is problematic due to the lack of suitable standard substances, as is the case for Zn compounds. The proposed procedure facilitates assignment of the signals to the individual components of the fractions for both types of chromatography, thus rendering the chemical speciation of Zn possible when the lack of suitable standard substances impedes the identification of individual components.     

Hot Branching Dynamics in a Light‐Harvesting Iron Carbene Complex Revealed by Ultrafast X‐ray Emission Spectroscopy

Iron N‐heterocyclic carbene (NHC) complexes have received a great deal of attention recently because of their growing potential as light sensitizers or photocatalysts. We present a sub‐ps X‐ray spectroscopy study of an Fe^IINHC complex that identifies and quantifies the states involved in the deactivation cascade after light absorption. Excited molecules relax back to the ground state along two pathways: After population of a hot ³MLCT state, from the initially excited ¹MLCT state, 30 % of the molecules undergo ultrafast (150 fs) relaxation to the ³MC state, in competition with vibrational relaxation and cooling to the relaxed ³MLCT state. The relaxed ³MLCT state then decays much more slowly (7.6 ps) to the ³MC state. The ³MC state is rapidly (2.2 ps) deactivated to the ground state. The ⁵MC state is not involved in the deactivation pathway. The ultrafast partial deactivation of the ³MLCT state constitutes a loss channel from the point of view of photochemical efficiency and highlights the necessity to screen transition‐metal complexes for similar ultrafast decays to optimize photochemical performance.     

Evaluation,Pitfalls and Recommendations for the “Water Layer Test” for Solid Contact Ion‐selective Electrodes

The “water layer test” is a crucial validation step of solid‐contact ion‐selective electrodes. It can confirm or contest the claim that the tested electrode is indeed a genuine solid contact electrode without an aqueous film between the ion‐selective membrane and its solid contact. Information about the presence of a water layer is essential for the interpretation of drifts in the electrode potentials commonly experienced with solid contact electrodes. Since its publication, the water layer test has been ubiquitously used, but without a standardized protocol the interpretation (or misinterpretation) of the test results led to uncertainties in the conclusions. Through both experiments and simulations based on theoretical models we have investigated the experimental parameters that can influence the results of the water layer test. We propose guidelines to minimize the possibility of misinterpretation of the results of the water layer test by considering the key factors that affect the shape of transients recorded during the water layer test. Most importantly, we emphasize the importance of allowing sufficient time for conditioning the tested electrode before the water layer test and providing adequate time for equilibration during the experiment. Using a thin ion‐selective membrane and thin solid‐contact layer for the tests is also recommended.     

From Distillation to Standardization: A French Perspective on the Shaping of Turpentine Spirit (1909–1976)

Turpentine is a complex substance of pine resin origin, widely used as a solvent in multiple industries. Attempts to define it, even when elaborated by scientists, have been marked by a whole range of extra-scientific market considerations. While the Pine Institute, a resin chemistry research centre in Bordeaux, succeeded in stabilizing the meaning of the word “turpentine” on the national level in France, its expertise was contested abroad. When the International Organization for Standardization (ISO) Committee 35 tried to establish a new international standard for turpentine, France was accused of protecting its industry by twisting scientific definitions for its own needs. The ISO members clashed over the relationship between trade standards and scientific definitions, at the same time highlighting the epistemological difficulties in constructing both categories.